Why Your Rolls Royce Remote Key Isn't Working
If your Rolls Royce Phantom key remote isn't functioning, it could be due to one of the issues listed below. It could be due to an unresponsive coin battery, water damage or an inoperable chip that needs to be reset.
The keys should be stored in a dry location away from electrical or wet areas. If you've done this, but it does not work, try the following steps:
Troubleshooting
Rolls Royce has a reputation for being a well-groomed modern, sophisticated brand of automobiles which is dedicated to excellence. Regular maintenance is important to prevent costly and lengthy problems in the future. One of the most crucial maintenance tasks is identifying and clearing fault codes. Fault codes are like tiny SOS signals that are sent by the vehicle's complex electronic system. Not noticing them is similar to not paying attention to a constant cough - it could be a sign of a bigger root issue.
There are many reasons why the key fob could stop working. It could be due to the battery in the coin-cell being dead or water damage, interference in the signal, receiver module issues or a malfunctioning chip. If you have tried everything from replacing the battery to reprogramming it and the issue persists it could be the right time to take your Rolls Royce to a professional for further troubleshooting.
The battery is the first thing you should be looking for when a keyfob stops working. A depleted coin battery is the most frequent reason for the key fob to cease functioning. It is crucial to replace the battery with a button cell battery of the same voltage, size and specifications as the original. It is also recommended to store the key fob in a secured location and away from objects that can cause mechanical damage, such as keys or coins.
After you've replaced the battery, it's important to ensure that all metal retaining clips are properly in place and are not causing contact problems. Make sure that the battery is free of corrosive substances. If the battery isn't authentic Rolls-Royce Replacement, it could be damaged by parts that aren't suitable and cause the door or receiver module to be locked.
Faulty Receiver Module
If the key fob stops working for a while and you have tried everything (replaced coin battery, reprogrammed key or even bought an extra) this could be a sign of that there is a problem with the receiver module, which is responsible for detecting and decoding the remote control signals. rolls royce key is especially relevant if you are in a position to use the key fob on another vehicle and it works.
The receiver modules of key fobs have metal clips that hold the battery and complete the circuit on the activation of the buttons. If these are damaged or bent, it could hinder the key fob from receiving the right signal to unlock or lock the vehicle. The receiver module could also stop working due to a faulty chip.
Faulty Key Fob
If your key fob isn't working, it may be due to a variety of reasons. The first issue that can occur is typically a dead battery in the coin-cell. It is easily replaced within a matter of minutes. The key fob can also malfunction due to damage to the receiver module, water issues, or signal interference. You can test for these issues by disassembling the key fob and applying isopropyl alcohol or electronic cleaner to the chip within.
Another reason could be worn buttons. Rubberized buttons on car key remotes may loosen over time or wear out. This can cause an inability to press the button and the designated pressure point, causing it not to function properly. It is simple to fix most key fobs at home. Simply disassemble the key, remove the buttons, and clean them. Then, simply soldering them back into place can help to restore functionality.
Other common causes of the malfunctioning keyfob could be batteries that are dead at 12 volts, keys that are not connected and require to be programmed again, or a malfunctioning chip. A damaged electronic chip will stop the key fob from sending an email to the vehicle's receiver module. The key fob can only start the engine of your Rolls Royce when it receives an indication from the chip.
Sometimes, a button start key can get hacked by tech-savvy thieves. These thieves can use artificial intelligence to detect the unique signal sent by the fob of the key and unlock or activate your car's ignition. Fortunately, this type of hack is becoming increasingly rare because security measures have been improved dramatically over time.
If you've lost your Rolls Royce remote key, you can call a professional locksmith company to create duplicate copies. An expert locksmith knows the specifics of each vehicle model, even ones with sophisticated central locking systems. This means that they can create a replica of your key fob without damaging the original. They can also provide an alternative to purchasing the replacement from the dealer. Autolocks LTD is an established locksmith business in the South East of England, will provide a superior service for all Rolls Royce models.